Cutting Unit; Cleaning And Lubrication - Gardeo GTHT2575LC Original Instructions Manual

CAUTION! The gear housing must not be filled
completely with grease. The grease expands as the
machine heats up during operation. If the gear
housing was completely filled with grease it could
damage the seals and lead to leakage of grease.
The grease in the bevel gear does not normally
need to be changed except if repairs are carried out.

Cutting unit

Check that the cutting units' screws are fitted
correctly.
Tighten them with a tightening torque of 7-10 Nm.

Cleaning and lubrication

Check that the blade edges are not damaged or
deformed. File away any burrs.
Check that the blades move freely. Remove the
lubrication plug in the gear housing and stick in the
combination spanner and turn back and forth.