Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Charnwood Aire
Summary of Contents for Charnwood Aire
- Page 1 ® Operating & Installation Instructions AUSTRALIA...
-
Page 3: Table Of Contents
CORNER HEARTH DIMENSIONS AIRE 3 DIMENSIONS AIRE 7 DIMENSIONS AIRE 3 LOW PARTS LIST AIRE 3 STORE STAND PARTS LIST AIRE 7 LOW PARTS LIST AIRE 7 STORE STAND PARTS LIST FLUE CLEARANCES DIAGRAM STANDARD DEFAULT TRIPLE SKIN FLUE KIT... -
Page 4: Quick Guide
High Output Output SERVICING Stove should be serviced by a professional at least once a year. LIGHTING AND CONTROLLING THE FIRE Suitable fuels for your Charnwood: Wood logs Unsuitable fuels: Petroleum coke Liquid fuel Household waste Coal singles Add kindling and paper or... -
Page 5: Operating Instructions
Charnwood. PETROLEUM COKE IS NOT SUITABLE FOR USE ON THIS The Charnwood Aire 3 and Aire 7 are fitted with an air control stop. APPLIANCE. ITS USE WILL INVALIDATE THE GUARANTEE. -
Page 6: Refuelling
To make ash removal easier there are ash carriers available. These It is recommended that the fire is serviced once a year to keep it in may be purchased from your supplier or, in case of difficulty, from first class working order. After cleaning out the firebox thoroughly, Charnwood. -
Page 7: Baffle And Flue Cleaning
On the Aire 7 there is an upper baffle plate that rests centrally on top of the air wash tubes and locates into the hook at the top of the front of the firebox. -
Page 8: If You Need Further Help
Your Local and the blanking plate are well sealed. It is also important that the flue Charnwood Dealer has a great deal of experience and will also be draw is sufficient and that it is not affected by down-draught. When able to provide helpful advice. -
Page 9: Unpacking The Stove
The internal dimensions of the chimney MUST NOT appliance to emit fumes into the room. The external air kit will help BE LESS THAN 125 mm (5”) - Aire 3, 150mm (6”) - Aire 7. with this in some situations. Alternatively, an additional air supply correctly positioned may be necessary. -
Page 10: Connections To Flues
The kit comprises of a cooking plate and four trivets and can only be fitted to the stove if a rear flue connection is made. The Aire 3 is capable of holding only 2 trivets at a time. For more information see PRE LIGHTING CHECK sheet REF. -
Page 11: Clearances
CLEARANCES ® PARALLEL POSITION CORNER POSITION COMBUSTIBLE WALLS AIRE 3 LOW/STORE STAND Standard Clearance Corner Clearance 75mm 200mm 210mm 393mm 325mm 512mm AIRE 7 LOW/STORE STAND Standard Clearance Corner Clearance 100mm 250mm 276mm 526mm 425mm 688mm... -
Page 12: Standard Hearth Dimensions
STANDARD HEARTH DIMENSIONS ® DEFAULT HEARTH TO WALL VERTICAL REAR FLUE ADAPTOR AIRE 3 LOW/ STORE STAND VERTICAL REAR FLUE ADAPTOR MIN. DIMENSIONS DEFAULT HEARTH MIN. DIMENSIONS TO WALL MIN. DIMENSIONS TO WALL 645mm 720mm 1151mm 675mm 675mm 675mm 300mm... -
Page 13: Corner Hearth Dimensions
AIRE 7 STORE STAND CORNER HEARTH WITH VERTICAL REAR FLUE ADAPTOR 820mm 820mm 526mm 526mm 438mm 438mm 458mm NON-COMBUSTIBLE MATERIAL Minimum thickness: 6mm Minimum thermal resistivity: 0.026m K/W - Aire 3, 0.1m K/W - Aire 7 Installed in accordance with AS/NZS 2918:2018 3.3.2... -
Page 14: Aire 3 Dimensions
AIRE 3 DIMENSIONS ® OPTIONAL VERTICAL REAR FLUE ADAPTOR (With bolted on flue collar & spacer plate) To suit 125mm PLAN VIEW (5”) flue pipe 65.0 WITH HEATSHIELD WITHOUT HEATSHIELD FRONT SIDE REAR... -
Page 15: Aire 7 Dimensions
AIRE 7 DIMENSIONS ® OPTIONAL VERTICAL REAR FLUE ADAPTOR (With bolted on flue collar) To suit 150mm PLAN VIEW (6”) flue pipe WITH HEATSHIELD WITHOUT HEATSHIELD FRONT SIDE REAR... -
Page 16: Aire 3 Low Parts List
AIRE 3 LOW PARTS LIST Charnwood Aire 3 Low Stand (Australia) Parts List ® Issue A Item Part No. Description Item Part No. Description 008/AA035 Door Seal (Inc Adhesive) 004/AA115 Slider 008/FW29 Door Seal Adhesive 004/BR015 Clicker Retainer Plate 006/PV19... -
Page 17: Aire 3 Store Stand Parts List
AIRE 3 STORE STAND PARTS LIST Charnwood Aire 3 Store Stand (Australia) Parts List ® Issue A Item Part No. Description Item Part No. Description 008/AA035 Door Seal (Inc Adhesive) 004/BR015 Clicker Retainer Plate 008/FW29 Door Seal Adhesive 008/ES36/01 Brass Ball Catch... -
Page 18: Aire 7 Low Parts List
AIRE 7 LOW PARTS LIST Charnwood Aire 7 Low Stand (Australia) Parts List ® Issue A Item Part No. Description Item Part No. Description 008/AC035 Rope Door Seal (Inc Adhesive) 010/AC077 Base Cover Plate 008/FW29 Door Seal Adhesive 010/AC078 Base Blanking Plate... -
Page 19: Aire 7 Store Stand Parts List
AIRE 7 STORE STAND PARTS LIST Charnwood Aire 7 Store Stand (Australia) Parts List ® Issue A Item Part No. Description Item Part No. Description 008/AC035 Rope Door Seal (Inc Adhesive) 010/AC078 Base Blanking Plate 008/FW29 Door Seal Adhesive 24# 010/AC043... -
Page 20: Flue Clearances Diagram
FLUE CLEARANCES DIAGRAM ® Summary of minimum height of flue sytem exit requirements from AS/NZS 2918:2018 6000 3000 More than 3000 or less 600 min. 3000 1000 min. if clear within 3000 of flue top Increase as necessary until nothing within 6000 of flue top Any nearby structure More than 3000 3000... -
Page 21: Standard Default Triple Skin Flue Kit
STANDARD DEFAULT TRIPLE SKIN FLUE KIT ® Cowl Flashing Optional 1000 Triple skin flue 1000 Ceiling Ring Dropbox 1000 Decorative Flue Solid OR Mesh 1000... -
Page 22: Insulated Room Seal Flue Kit
INSULATED ROOM SEAL FLUE KIT ® STANDARD FLUE KIT Cowl Room sealed flue (with locking band) 1000 Starter length flue 1000 Ceiling ring Room sealed flue adaptor 1000 Single skin flue Heatshield... -
Page 23: Insulated Room Seal Flue Kit
INSULATED ROOM SEAL FLUE KIT ® FULLY SEALED FLUE KIT Cowl Room sealed flue (with locking band) 1000 Starter length flue 1000 Ceiling ring 1000 Heatshield 1000... -
Page 24: Insulated Room Seal Flue Kit
INSULATED ROOM SEAL FLUE KIT ® REAR FLUE KIT Cowl Room sealed flue (with locking band) 1000 Gutter Wall Penetration Roof support brace min 25 Adjustable wall bracket Wall Plate Cleaning access Wall plate gal NOTE: 2700 There needs to be 50mm clearance to any timber above the flue pipe and a 25mm clearance to any timber to the side and underneath. -
Page 25: Compliance Data
COMPLIANCE DATA ® AIRE 3 COMPLIANCE DATA AIRE 7 COMPLIANCE DATA Compliance plate riveted onto rear heatshield (Aire 3 & Aire 7) -
Page 26: Charnwood Australia 10 Year Guarantee
• The following conditions apply: • If any part fails due to manufacturing or material defect within the guarantee period Charnwood will, free of charge, either repair or replace the part at their discretion. The decision of Charnwood is final. - Page 28 your premier dealer...