Atlantic TIMELIS Installation And Operating Manual page 27

P
ROBLEM
ENCOUNTERED
Daily repetition in 24h
Auto mode does not
start at the wanted time.
For program-controlled appliances:
The heated towel rail does
not follow the orders from
the program.
The heating indicator
comes on when the radia-
tor is in ECO mode.
If you do not manage to solve your problem, contact the manufacturer's after-sales de-
partment. Have the references of the heated towel rail handy: the sales reference and se-
rial number (see page 14).
Measure the temperature of the room and have information available on the system of
programming if there is one.
- Check that the time has not changed from Summer to Winter time or vice
versa.
- If your towel-drying radiator has been off for a certain number of hours,
daily repetition in 24h Auto mode is postponed by the same number of
hours. In this case, please refer to Page 21 "Changing the starting time for 24h
Auto mode".
E.g.: At 7:00 AM, 24h Auto mode's daily repetition cycle starts for a period of 2 hours,
i.e. until 9:00 AM.
At 10:00 AM, you switch off the heating from your towel-drying radiator (by pressing
switch B).
At 10:00 PM, you switch it back on again (by pressing switch B again).
Your towel-drying radiator was in "Heating OFF" status for 12 hours. 24h Auto mode's
daily repetition will therefore start at 7:00 PM the following day (7:00 AM + 12
hours).demain (7h + 12h).
Make sure that the programmer is properly set according to the ins-
truction book.
This is normal.
The heated towel rail may heat up to maintain a temperature of 3.5°C
below the COMFORT temperature.
W
HAT TO DO
26