Functional Overview; Mounting - Danfoss FH-CWD Instruction

Instruction FH-CWD Thermostat

1. Functional Overview

Front - fig. 1
 Push button
 Push button M
 Up/down selectors
Back - fig. 2
Screw hole for flush mounting 
Terminals for cable mounting 
Symbols in the display - fig. 3

2. Mounting

! Wherever possible, the room thermostat should be
installed where the effects of sunlight, draught, and
other heaters (eg. TV's), etc. are avoided.
Produced by Danfoss Floor Heating Hydronics 05.2011
Room Sensor
Floor Sensor
Temperature indication
Set Room temperature
Set Floor temperature
Floor heating – Active
Frost Protection – Active
VI.CU.B2.02
3