User Guide; Functional Overview; Setting The Temperature - Danfoss BasicPlus2 User Manual

User Guide

1

Functional Overview

Symbols Function description
Room temperature
Floor temperature
Temperature indication
Set temperature
SET
Floor heating, Active
Frost protection, Active
2 Power ON/OFF
Turn the thermostat ON or OFF by pressing
3

Setting the Temperature

• Press < or > at any time to change the desired temperature value. SET is shown in the display.
• When releasing < or >, the display returns to showing the actual temperature.
• The adjustment step is 0.5° C.
4 Select Away Mode
• Press M to enter Away mode and
• Press < or >. SET appears; set the Away mode setpoint.
• Press M again to exit Away mode.
5 Set Timer
• Press ; hh flashes. Press < or > to adjust hour.
• Press again; mm flashes. Press < or > to adjust minute.
again; week flashes. Press < or > to adjust week.
• Press
• Complete all adjustments. Press any button to exit (automatic exit after 6 seconds with no operation).
6 Advanced Programmable Timer
The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic
comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is
not required.
2
Danfoss Floor Heating Hydronics
BasicPlus
Symbols
< >
.
will be displayed.
(only for WT-P and WT-PR types)
Room Thermostats
2
Function description
Away mode
Child safety lock
Power ON/OFF
Timer and program
operation
Mode change/check floor
M
temp./child safety lock/
parameters setting
Up/down selectors
(only for WT-P and WT-PR types)
VUCUA212
< >
SET
M
03/2015