Hilti GX-IE Operating Instructions Manual page 20

3 Description
3.1 Product overview
3.2 Intended use
The product described is a gas-actuated fastening tool. It is for driving suitable fasteners into concrete and
other materials suitable for use of the direct fastening technique.
The fastening tool, gas can, battery and fasteners form a technical unit. This means that trouble-free
fastening with this fastening tool can be ensured only when it is used together with the fasteners, gas cans
and batteries specially manufactured for it by Hilti. The fastening and application recommendations made
by Hilti apply only when these conditions are observed.
The fastening tool is for hand-held use only.
▶ Use only Hilti Li­ion batteries of the B 12 series with this product.
▶ Use only Hilti battery chargers of the C 4/12-50 series for charging these batteries.
3.3 Items supplied
Gas-actuated fastening tool with fastener guide, 2 batteries, charger, toolbox and operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Fastener guide 2
The fastener guide holds the insulation plug and in the driving process it directs the fastener to the desired
position in the material.
3.5 Fastener guide release slider
In the EJECT position, the slider releases the fastener guide for removal.
Status
EJECT
3.6 Belt hook
The belt hook can be extended in three stages.
16 English
1
Fastener guide
@
Fastener guide release slider
;
Belt hook
=
Safety trigger
%
Cooling air slots
&
Gas can compartment
(
Battery release button
)
Battery state of charge indicator
+
Gas can status indicator button
§
Gas can status indicator
/
Battery
:
Meaning
Fastener guide release
2208856
*2208856*