Summary of Contents for Happybeds ARLO 5 Drawer Chest
Page 1
Assembly Instructions Title of Product ARLO 5 Drawer Chest Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Vendor: S000350 ASSEMBLY INSTRUCTIONS ARLO 5 DRAWER NARROW CHEST IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR ARLO 5 DRAWER NARROW CHEST. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. ASSEMBLY: Assembly should be carried out with this item laying flat, not standing upright. Assemble on a soft, clean surface to prevent damages.
Page 4
Vendor: S000350 Parts List Hardware List Part Descripion Part Description Top panel Cam lock Bottom panel Minifix screw Side panel ( Left ) Plastic cap Side panel ( Right ) M8 x 30mm Wood Dowel Back bone M6 x 50mm CSK Cap Wood screw Back panel Allen key M4 Small drawer front...
Page 5
Vendor: S000350 Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, F and K1. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 2: Attach the side panel left (3) and side panel right (4) to the back bone (5) using hardware A1 and A2 with a screwdriver (not provided).
Page 6
Vendor: S000350 Step 4: Attach bottom panel (2) to side panel (3) and (4) using hardware C and D. DO NOT use any power tools as this may damage the frame and will invalidate any claim. C x 4 Step 5: Attach back panel (6) to entire body using hardware H with a hammer (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 7
Vendor: S000350 Step 7: Assemble the hardware part I to the small drawer front (7) and the drawer front (10) using hardware E. Small Drawer – 1. Attach the small drawer sides (8) to the small drawer front (7) and small drawer back (9) using hardware parts G. 2.
Vendor: S000350 Step 8: Assemble the drawer in place along the drawer slides. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 9: To secure the item to the wall use hardware G, L and M using a screwdriver (not provided). Then attach hardware part L to top panel (1) using hardware F with a screwdriver (not provided).
If this is not adhered to, it could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...