Download Print this page

Advertisement

Quick Links

AMERICAN Wooden Triple Sleeper
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Assembly Instructions
Title of Product
.
.
www.happybeds.co.uk

Advertisement

loading
Need help?

Need help?

Do you have a question about the AMERICAN Wooden Triple Sleeper and is the answer not in the manual?

Questions and answers

Summary of Contents for Happybeds AMERICAN Wooden Triple Sleeper

  • Page 1 Assembly Instructions Title of Product AMERICAN Wooden Triple Sleeper Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
  • Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
  • Page 3: Side View

    Width 91cm x Length 190cm / Width 120cm x Length 190cm with Maximum Depth of 16cm. Side View Small Mallet (not provided)
  • Page 4 All measurements are approximate...
  • Page 5 PARTS...
  • Page 6 Top Headend / Footend 1/4 x110 mm Screw Botom Headend / Footend 1/4" Elliptical nut Upper foot 7,0 x 100 mm Screw Upper foot 7,0 x 50 mm Screw Side rail Allen key Top front guard rail 4,0 x 35 mm CC Screw Lower foot 10 x 40 mm Wooden dowel Lower foot...
  • Page 7 Lower Bunk Headboardend Small Mallet 10 x 40mm Upper Bunk Headboardend 10 x 40mm Small Mallet...
  • Page 8 Small Mallet 10 x 40mm Lower Bunk Headboardend Side View 7,0 x 100mm...
  • Page 9 Upper Bunk Headboardend Side View 7,0 x 100mm 4,0 x 50mm Top View...
  • Page 10 Lower Bunk Back View 1/4 x 110mm 4,0 x 25mm 14 x 40mm 4,5 x 16mm Lower Bunk Back View...
  • Page 11 Upper Bunk Back View 1/4 x 110mm 7,0 x 100mm Back View Upper Bunk 7,0 x 50mm...
  • Page 12 Upper Bunk 7,0 x 100mm 7,0 x 50mm Back View Upper Bunk 4,0 x 35mm...
  • Page 13 Top View Pushing the side rails together so that the slat is push against the side rail, before inserting the screws. Lower Bunk 4,0 x 35mm Upper Bunk Pushing the side rails together so that the slat is push against the side rail, before 4,0 x 35mm inserting the screws.
  • Page 14 Lower Bunk 4,0 x 35mm Upper Bunk 4,0 x 35mm...
  • Page 15 Assembly of Top and Lower Bunk Back View 4,0 x 35mm...
  • Page 16: Back View

    7,0 x 50mm 01 M 17,0mm Assembling Ladder Back View 4,0 x 16mm...
  • Page 17: Top View

    Side View Side View 4,0 x 35mm 4,0 x 16mm Top View...
  • Page 18 4,0 x 16mm 4,0 x 25mm...
  • Page 19 Side View WARNING: THE MATRESS SURFACE MUST NOT BE ABOVE THIS LINE. 17,0mm Your New Mya / American Triple Sleeper is now completed and ready to use.
  • Page 20: General Care And Maintenance

    floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...