Carrying Out A Measurement - kruss Mobile Surface Analyzer User Manual

Carrying out a measurement

2. Enter the used liquids into ADVANCE.
3. Press the button
The calibration is executed automatically. The MSA is ready for measurement.

During calibration one drop per liquid is dosed in three steps, i.e. there are two drops on
the calibration plate after calibration.
4.5 Carrying out a measurement

Set the MSA to the required measuring position on the sample.

Press the measurement button on the MSA.
The measurement is carried out fully automatically. The contact angles for water and
diiodomethane appear in the results list. The surface free energy of the sample is shown
below them.
KRÜSS GmbH | Borsteler Chaussee 85 | 22453 Hamburg | Germany | www.kruss.de
Calibrate in ADVANCE.
page 11