Kia Cerato 2019 Owner's Manual page 542

Maintenance
• Lamp part malfunction due to
net-work failure
The headlamp, taillight, and fog light
may lit up when the head lamp
switch is turned ON, and not light up
when the taillight or for light switch is
turned ON. This may be cause by
network failure or vehicle electrical
control system malfunction. If there is
a problem, have the system serviced
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.
8 100
• Lamp part malfunction due to
electrical control system stabi-
lization
A normally functioning lamp may
flicker momentarily. This momentary
occurrence is due to stabilization
function of the vehicle's electrical
control system. If the lamp soon
returns to normal, the vehicle does
not require service.
However, if the lamp goes out after
the momentary flickering, or the flick-
ering continues, have the system
serviced by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.
✽ ✽ NOTICE
• If the light bulb or lamp connector
is removed from an operating
lamp activated by electricity, the
fuse box's electronic device may
scan it as a malfunction.
Therefore, a lamp malfunction
history may be recorded in
Diagnostic Trouble Code (DTC) in
the fuse box.
• It is normal for an operating lamp
may blink temporarily. Since this
occurrence is due stabilization
function of the vehicle's electronic
control device, if the lamp lights
up normally after temporary
blinking, there is no problem in
the vehicle.
However, if the lamp continues to
blink several times or turn off
completely, there may be an error
in the vehicle's electronic control
device. In this case, have the vehi-
cle checked by a professional
workshop immediately. Kia rec-
ommends to visit an authorised
Kia dealer/service partner.