Kia Cerato 2019 Owner's Manual page 146

Features of your vehicle
(Continued)
• When the LKA (Lane Keeping
Assist) system failure indica-
tor (yellow) illuminates (if
equipped) and etc.
When front visibility is poor
• When the lamp of the on-com-
ing or front vehicle is covered
with dust, snow or water.
• When the light from the on-
coming or front vehicle is not
detected because of exhaust
fume, smoke, fog, snow, etc.
• When the front window is cov-
ered with foreign matters.
• When it is hard to see because
of fog, heavy rain or snow and
etc.
• Do not disassemble a front
view camera temporarily for
tinted window or attaching any
types of coatings and acces-
sories. If you disassemble the
camera and assemble it again,
have the vehicle checked by a
professional workshop
need a calibration.
(Continued)
4 126
(Continued)
Kia recommends to visit an
authorised Kia dealer / service
partner.
• When you replace or reinstall
the windscreen glass, front
view camera, have the vehicle
checked by a professional
workshop. Kia recommends to
visit an authoriser Kia dealer /
service partner.
• Be careful that water doesn't
get into the High Beam Assist
unit and do not remove or
damage related parts of the
High Beam Assist system.
• Do not place objects on the
crash pad that reflect light
such as mirrors, white paper,
etc. The system may malfunc-
tion if sunlight is reflected.
• At times, the High Beam
Assist may not work properly.
The system is for your con-
venience only.
to
(Continued)
It is the responsibility of the
driver for safe driving prac-
tices and always check the
road conditions for your safe-
ty.
• When the system does not
operate normally, change the
lamp
between the high beam and
low beam.
(Continued)
position manually