Kia Cerato 2019 Owner's Manual page 30

Features of your vehicle
CAUTION
Changes or modifications not
expressly approved by the party
responsible for compliance
could void the user's authority
to operate the equipment. If the
keyless entry system is inopera-
tive due to changes or modifica-
tions not expressly approved by
the party responsible for com-
pliance, it will not be covered by
your manufacturer's vehicle
warranty.
4 10
Battery replacement
The transmitter or smart key uses a
3 volt lithium battery which will nor-
mally last for several years. When
replacement is necessary, use the
following procedure.
1. Insert a slim tool into the slot and
gently pry open the transmitter or
smart key cover.
2. Replace the battery with a new
battery (CR2032). When replacing
the battery, make sure the battery
position.
3. Install the battery in the reverse
order of removal.
For transmitter or smart key replace-
ment, Kia recommends to visit an
authorised Kia dealer/service part-
ner.
CAUTION
• The keyless entry system
transmitter is designed to give
you years of trouble-free use,
however it can malfunction if
exposed to moisture or static
electricity. If you are unsure
how to use or replace the bat-
OBD048032L
tery, Kia recommends to con-
tact an authorised Kia deal-
er/service partner.
• Using the wrong battery can
cause the transmitter or smart
key to malfunction. Be sure to
use the correct battery.
• To avoid damaging the trans-
mitter or smart key, don't drop
it, get it wet, or expose it to
heat or sunlight.