Kia Cerato 2019 Owner's Manual page 308

Driving your vehicle
Recognizing vehicles
- The camera is contaminated with
foreign substances.
- It heavily rains or snows.
- There is interruption by electric
waves.
- The vehicle in front has a narrow
body. (i.e. motor cycle and bicycle)
- The driver's view is unclear due to
the backlight, the reflected light, or
darkness.
- The camera cannot contain the full
image of the vehicle in front.
- The vehicle in front is a special
vehicle, such as a heavily-loaded
truck or a trailer.
- The outside brightness is greatly
changed, such as entering/exiting
the tunnel.
- The vehicle driving is unstable.
- The camera sensor recognition is
limited.
- The driver's field of view is not well
illuminated (either too dark or too
much reflection or too much back-
light that obscures the field of view)
6 68
- The vehicle in front is driving errat-
ically
- Backlight is reflected in the direc-
tion of the vehicle (including front
light from the vehicle ahead)
- Moisture on the windscreen is not
completely removed or frozen.
- The weather is misty.
- The vehicle in front does not turn
ON the rear lights, does not have
rear lights, has asymmetric rear
lights, or has rear lights out of
angle.
- The vehicle is on unpaved or
uneven rough surfaces, or roads
with sudden gradient changes
- The vehicle is moving under
ground level or inside a building
- If a sudden change in the sensor
recognition takes place whilst
passing through the speed bump,
- When the vehicle is severely shak-
en,
- When driving around circular inter-
section after the vehicle in front,
- If the front of the camera lens is
contaminated by front glass tinting,
film, water repellent coating, dam-
age on glass, foreign matter (stick-
er, insect, etc.)
- The camera or camera lens is
damaged.
- If the headlights of the vehicle are
not used at night or in the tunnel
section, or the light is too weak
- If street light or the light of the vehi-
cle coming from the opposite is
reflected or when sunlight is
reflected by the water on the road
surface
- When the back light is projected in
the direction of the vehicle's motion
(including the headlights of vehi-
cles)
- Road sign, shadow on the road,
tunnel entrance, toll gate, partial
pavement
- If the windscreen has moisture on
its surface or if windscreen freezes,
- Driving in the fog.
- When objects are out of the sens-
ing range of the camera