Kia Cerato 2019 Owner's Manual page 144

Features of your vehicle
Operating condition
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by pushing
the lever away from you.
3.The High Beam Assist (
tor will illuminate.
4.The High Beam Assist will turn on
when vehicle speed is above 40
km/h.
5.The details of operation with the
light switch whilst the High Beam
Assist is on are below.
• If the light switch is pushed away,
the High Beam Assist will turn off
and the high beam will be on con-
tinuously.
• If the light switch is pulled towards
you when the high beam is off,
the high beam will be on without
cancellation of the High Beam
Assist. (When you hands off, the
lever will move to the middle and
the high beam will turn off.)
4 124
• If the light switch is pulled
towards you when the high beam
is on by the High Beam Assist,
the low beam will be on and the
High Beam Assist will turn off.
• If the light switch is turned to the
) indica-
headlamp position (
AUTO position, the High Beam
Assist will turn off and the low
beam will be on continuously.
When the High Beam Assist is oper-
ating, the high beam switches to low
beam in the below conditions.
- When the headlamp is detected
from the on-coming vehicle.
- When the tail lamp is detected
) from
from the front vehicle.
- When headlamp/tail lamp of bicy-
cle/motorcycle is detected.
- When the surrounding is so bright
that high beams are not needed.
- When streetlights or other lights
are detected.
- When the light switch is not in the
AUTO position.
- When the High Beam Assist is off.
- When vehicle speed is below 30
km/h.