Kia Cerato 2019 Owner's Manual page 376

Driving your vehicle
- The second stage alarm can be
deactivated.
• To activate the alarm:
Go to the User Settings Mode →
BCW (Blind-Spot Collision Warning)
sound on the LCD display.
• To deactivate the alarm:
Go to the User Settings Mode →
BCW (Blind-Spot Collision Warning)
sound on the LCD display.
CAUTION
The alarm function helps alert
the driver. Deactivate this func-
tion only when it is necessary.
6 136
Detecting sensor
The sensors are located inside the
rear bumper.
Always keep the rear bumper clean
for the system to work properly.
Warning message
OBD058039L
The message will appear to notify
the driver if there are foreign sub-
stances on the surface or inside the
rear bumper or it is hot near the rear
bumper. The light on the switch and
the system will be turned off auto-
matically.
Remove the foreign substance on
the rear bumper.
After the foreign substance is
removed, if you drive for approxi-
mately 10 minutes, the system will
work normally.
OJF058433R