2.2
Dangerous situations
The figure below shows the emergency stops and the safety marks on the machine with
references to the potential risks.
2.3
Emergency stop
There are two emergency stop buttons on the machine. They are situated on both sides of
the machine on the side panel.
The procedure to reset the machine after an emergency stop is described in paragraph 5.3.
Create PDF
files without this message by purchasing novaPDF printer (http://www.novapdf.com)
The fork moves in a linear
system. During the process there
is a risk of injury by turning parts.
Only approach when the system
is switched out.
A
Read and understand this manual before you use the machine or do
maintenance.
B
Risk of injury by turning parts.
C
Risk of injury by electric shock.
D
Risk of injury by clamping parts.
E-F Emergency stop.
WARNING:
Before resetting the emergency stop, make sure that the problem has
been solved and the machine is safe to start up again.