Adjusting The Set Temperature; Press And Hold - Balboa TP500 User Manual

Temperature and Temp Range

Adjusting the Set Temperature

When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to flash. Pressing
a temperature button again will adjust the set temperature in the direction indicated on the button. When the LCD stops flashing, the spa
will heat to the new set temperature when required.
If the panel has a single temperature button, pressing the button will cause the temperature to flash. Pressing the button again will cause
the temperature to change in one direction (e.g. UP). After allowing the display to stop flashing, pressing the Temperature Button will cause
the temperature to flash and the next press will change the temperature in the opposite direction (e.g. DOWN).
Press-and-Hold
If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change until the button is
released. If only one temperature button is available and the limit of the Temperature Range is reached when the button is being held, the
progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in the display by
a thermometer and an "up" arrow, and the Low Range designated in the display by a thermometer and "down" arrow.
These ranges can be used for various reasons, with a common use being a "ready to use" setting vs. a "vacation" setting. The Ranges
are chosen using the menu structure below. Each range maintains its own set temperature as programmed by the user. This way, when a
range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
More specific Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
for additional heating control information.
Sub-Menu Detail – Set Temperature and Water Temperature Ranges
Main Screen Set Temp will Show & Flash
High-Range vs.
Low-Range Temp Choice
Toggle the Range arrows in the LCD.
To next item in Main Menu
Main Screen
Set Temp will Show & Flash
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052,
6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All
material copyright of Balboa Water Group.
42339 rev A1
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Main Screen
To Set
*****
Waiting a few
seconds reverts to
original settings
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
5
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Menu/Select button
Waiting time that keeps the last change to a menu item.
***** Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
Main Screen
OR
a few seconds
Main Screen
OR
a few seconds
03/06/20