JUICE GOOSE iP Series Owner's Manual page 7

5. Open Network connections by double clicking on it, select the LAN or HIGH-
SPEED icon, right click on this and select properties.
6. Click once on the Internet Protocol item that you will see at the bottom of the
list and select the properties button which is at the mid right.
7. Check the "Use the following IP address" box and then change the IP ad-
dress to: 192.168.1.1, then change the Default Gateway address also to:
192.168.1.1.
8. Click OK and then close the network box.
9. Open a web browser on your PC and type in the following address on the
navigation bar to access the iP device: 192.168.1.77.
10. The iP device login box will appear, enter your login details and operate the
iP device.
You can also configure the required IP address and any network/RS232 set-
tings you require using the RS232 connection. See page 14 for detailed RS232
commands and setup requirements.
The iP Series Management section is accessible from the top right link named
"Management". It consists of 4 tabs;
Overview—Which shows the current configuration of the iP device.
Network Setup– Where you can configure IP address and other required net-
work settings dependant on your personal network
User Setup– Where you can set the username and password for both the
admin account and user account
Configuration— Which allows you to configure RS232 baud-rate setting and the
Power Cycle feature of POD1.
Page 6