Table of Contents
Advertisement
CONFIGURATION
This is the configuration tab. Here you can assign a new IP or control the device
via RS232 commands (see page 13 and 14 for the list of commands). This will
require a special cable (detailed drawing on page 13). You can also enable/
disable UDP and TCP.
The only field that is variable for RS232 communication is the Baud rate which
is set at a default of 19200bps. RS232 communication uses COM1. Your com-
puter will need to be set to the same values as follows; Baud rate=19200, Par-
ity=None, Data Bits=8, Stop Bits=1.
Once you have configured the PC's COM1 port to match the above values you
can then use a Terminal program to access and issue the RS232 commands.
There are several free terminal programs available such as Microsoft Hyper-
terminal. Or you can download one direct from the iP product page on the Juice
Goose website at http://juicegoose.com/product-ip-1520.html
Page 10
Advertisement
Table of Contents
