Table of Contents
Advertisement
RAW TCP CONTROL
It is possible to control and monitor iP device over Ethernet using raw TCP pro-
tocol. In this mode, any PC ( Windows, Linux, Mac ) can connect to the iP de-
vice over a TCP/IP connection using a suitable TCP/IP client program. Once
the connection is made, the serial port console and its commands are available
to the user over TCP/IP as if the user was connected to IP device over the local
serial connection.
By default, TCP feature is disabled due to security reasons. This can be en-
abled through the web interface. The default TCP port is 33333; this can also
be changed through the web interface.
To enable TCP feature, click on iP Series Management link on the web inter-
face and then click on Configuration tab. Mark the button called Enable in the
TCP section. Change the default TCP port, if needed.
Page 15
Advertisement
Table of Contents
