JUICE GOOSE iP Series Owner's Manual page 3

QUICKSTART GUIDE
1. Unbox the unit. The box should contain: iP Series device, Quick Start
Guide, and Juice Goose promotional material. You will need a CAT5 net-
work cable if attaching to a router, a CAT 5/6 crossover cable if connecting
directly to a PC and a custom RS232 cable if you wish to connect via
RS232 (see page 13 for a diagram on how to build the RS232 cable) if your
model supports RS232.
2. With your PC on and booted up, connect the iP series device to your
router or PC using a suitable cable. If the iP series device is connected to a
network router use a standard CAT 5 cable, if connected directly to a PC
use a CAT 5/6 crossover cable.
3. Plug the iP series device power cord into a live AC receptacle, such as a
wall outlet, with a 15 or 20 amp capacity depending on model or in the case
of the IP-PD1-4 have an electrician hardwire the unit.
4. The iP series device will take about 30 seconds to boot up and configure
itself at which point the Network light on the front of the unit will illuminate,
indicating network connectivity. If the Network light blinks or does not light
at all check the cable connections.
5. Open up your web browser and type in the following default IP address
to access the iP series deivce: http://juicegoose (if that fails to work try
192.168.1.77)
6. At this point you will be prompted to log into the iP series device.
Initial login will be:
Username: admin
Password: juicegoose
7. You will be presented with the control section where you can control the
iP series PODS by clicking on the buttons or using the Sequence field by
entering the value in seconds and clicking the Sequence UP button.
8. To setup a specific IP address, change passwords for the admin/user
account or configure other advanced features of the iP device click on the
iP Series Management link at the top right of the displayed page. You will
need to be logged in as admin to access this section. This section is de-
scribed in more detail beginning on page 6.
See your system administrator, if you have one, for help with configuration.
Page 2