Martec Malibu Series Installation Manual

Thanks for choosing our Malibu Series ceiling fan.
We strongly recommend that you read this manual carefully before installation.
Models Parameters (Fan Only):-
MMF133MBR 1320mm 3 Blade Ceiling Fan Matt Black/Bamboo with remote control
MMF133MMR 1320mm 3 Blade Ceiling Fan Matt Black with remote control
MMF133OWR 1320mm 3 Blade Ceiling Fan Walnut with remote control
MMF133WWR 1320mm 3 Blade Ceiling Fan White with remote control
Models Parameters (Fan and Light):-
MMF1333MBR 1320mm 3 Blade Ceiling Fan Matt Black/Bamboo, 15W Tricolour LED Light with Remote Control
MMF1333MMR 1320mm 3 Blade Ceiling Fan Matt Black, 15W Tricolour LED Light with Remote Control
MMF1333OWR 1320mm 3 Blade Ceiling Fan Walnut, 15W Tricolour LED Light with Remote Control
MMF1333WWR 1320mm 3 Blade Ceiling Fan White, 15W Tricolour LED Light with Remote Control
Part List:
Qty 1x motor assembly
Qty 1x balancing kit
Qty 3x blades
Application
Flat Surface / Ceiling
How to Assemble
Fg.1
Secure the hanger bracket
to ceiling beam or a suitable
piece of timber inserted
between the ceiling beams
using the two long screws
supplied with the package.
(See Fg.1)
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
M A L I B U S e r i e s I n s t a l l a t i o n G u i d e
Qty 1x instruction manual
Qty 1x hanging bracket
Slope Ceiling up to 15°
Fg.2
Place circular shockproof
gasket above the hanger
bracket. Align the bracket
and screw the hanger
bracket to the ceiling tightly.
(See Fg.2)
Qty 1x screw kit
Qty 1x remote control kit
Corrugated Ceiling
Fg.3
Place fan into hanger
bracket and align Ball Joint
Slot with hanger bracket as
illustrated.(See Fg.3)
Apex Ceiling
Fg.4
After wiring is completed,
attach the canopy to the
hanger bracket by pushing
upwards and twisting anti-
clockwise. Tighten screws
and ensure canopy is not
touching the ball joint.
(See Fg.4)