Advertisement
Available languages
Available languages
G
B
FLAT STRONG BOX
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake release system.
Of die-cast aluminium - IP54.
FLAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
It is equipped with two microswitches with contacts 15A 250V.
Dim.: 59,5x82,5x29
KEY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/Close) and one
switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED WITHOUT STOP dim.: 100x100x109
- TO WALL WITHOUT STOP dim.: 100x100x42
ASSEMBLY ACCESSORIES
PAIR OF HALF-SHELLS
Ø 42 => Ø 60 mm
Ø 48 => Ø 60 mm
FIT SLIM
PHOTOCELLS for the wall-installation
PAIR OF COLUMNS FOR FIT SLIM
code ACJ9071
FIT SLIM photocells have synchronism function in AC current and ranges of 20 m.
You can fit many photocell couples close together thanks to the optional synchronizing
circuit SYNCRO TRANSMITTER TX SLIM SYNCRO code ACG8029 for more than 2
photocells couples (up to 4).
SPARK
In order to make the systems mentioned above give the best performances, you need
to install an antenna tuned on the frequency of the radio receiver installed. N.B. Pay
code ACG2012
attention to not let the central wire of the cable to came Into contact with the
external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 433
RADIO TRANSMITTER SUN
SUN 2CH
code ACG1010
SUN CLONE 2CH
code ACG1030
PULLEY ADAPTER
code ACJ9040
Ø 200 => Ø 220 mm
code ACJ9050
26
code ACG6052
SUN 4CH
code ACG6056
SUN CLONE 4CH
code ACG8032
code ACG8065
code ACG7059
code ACG7042
code ACG5452
code ACG6054
code ACG6058
code ACJ9055
Advertisement
