Table of Contents
Advertisement
Advice
Keep your work area tidy.
Clutter in work areas increases risks of accidents.
Take the work environment into account.
Do not expose electric tools to rain. Do not use electric tools in a damp or wet
environment. Make sure the work area is properly lit. Do not use electric tools
near inflammable liquids or gases.
Protect yourself from electric shocks.
Avoid bodily contact with surfaces connected to the earth, such as battery
chargers, electric multi-plugs, etc.
Keep away from children!
Do not allow third parties to touch the tool or cable. Keep them away from your
work area.
Store your tools in a secure location.
When not in use, tools must be stored in a dry, locked location in their original
packaging and out of the reach of children.
Wear suitable work clothing.
Do not wear loose-fitting clothing or jewellery. It could be caught up in moving
parts. When working in the open air, wearing rubber gloves and non-slip sole
footwear is recommended. If your hair is long, wear a hair net.
Wear protective eye-wear.
Also wear a mask if the work being carried out generates dust.
Protect the power cord.
Do not carry the tool using its cord and do not pull on the cord to disconnect it
from the socket. Protect the cord from heat, oil and sharp edges.
Maintain your tools carefully.
Regularly check the plug and power cord condition and, if they are damaged,
have them replaced by a recognised specialist. Keep the ELECTRO'LIV equipment
dry and free of oil.
Remove the tool keys.
Before starting the machine, make sure the keys and adjustment tools have been
removed.
Check if your device is damaged.
Before reusing the tool, carefully check that the safety systems or slightly
damaged parts are in perfect working order.
Have your tool repaired by a specialist.
This machine is compliant with applicable safety rules. All repairs must be carried
out by a specialist and only using original parts, failure to do so could result in
serious risks to user safety.
14
Advertisement
Table of Contents
