Table of Contents
Advertisement
Other
The standard material for the Switch seal is nitrile rubber (NBR),
which has superior resistance to oil. Depending on the type of oil
or chemicals in the application environment, however, NBR may
deteriorate, e.g., swell or shrink. Confirm performance in advance.
The correct Switch must be selected for the load to ensure contact
reliability. Refer to Precautions for microloads in individual product
information for details.
Wire the leads as shown in the following diagram.
Correct Wiring
Crimped location
facing up
Lead
Crimp terminal
Terminal
screw
Terminal
Incorrect Wiring
Crimped location
facing down
Lead
Crimp terminal
Terminal
screw
Terminal
Too close to maintain
dielectric strength
http://www.ia.omron.com/
Correct
Terminal
screw
Terminal
Incorrect
Terminal
screw
Terminal
Precautions for All Switches
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
C-10
Advertisement
Table of Contents
