Installing The Terminating Connector - Siemens SINUMERIK HT 10 Equipment Manual

4.5.4

Installing the terminating connector

Procedure
Note
If you never remove the HT 10 from the connection module, it is not necessary to attach the
terminating connector.
1. Unscrew the fastening nut
2. Attach the bracket
3. Tighten the fastening nut and insert the terminating connector into the bracket.
Handheld Terminal HT 10
Equipment Manual, 09/2020, A5E47430965B AA
①
.
①
for the terminating connector
4.5 PN Basic connection module
②
.
Connecting
59