3X360R, 3X360G
Users Manual
Horizontal Leveling Accuracy
D
Laser to a is 1m
3 m
4 m
5 m
9 m
D
Laser to a is 3.2 ft
9.8 ft
13.1 ft
16.4 ft
29.5 ft
It is important to conduct an accuracy check at the expected working distance for the specific use case and is illustrated in
Table 6.
1. Place the laser on a flat surface going in one direction. You will need to have a set distance between (a,b) which will be
referred to as "D".
2. Turn on the horizontal beam and mark (a,b)
3. Once "D" is identified based on illustration 1, rotate the laser 90 degrees horizontally as seen below.
4. Mark c and calculate the distance between c,b and this is F.
8
a
is 3.2ft (1m) away from laser
a
Rotate 90° Horizontally
c
b
a
Table 6
E, F, G
≤ 1.6 mm
≤ 2 mm
≤ 2.4 mm
≤ 4 mm
E, F, G
≤ 1/16 in
≤ 5/64 in
≤ 3/32 in
≤ 5/32 in
D
illustration 1
illustration 2
b
c
b