Kennedy II 42 / JR-42S Manual page 12

TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED
SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection, and
wire the appliance directly to the house hold wiring. This appliance must be electrically connected and
grounded in accordance with local codes.
1.Remove the cover plate from the left side of the appliance. Remove the two screws, as shown in FIGURE 1.
Unscrew and remove power cord.
FIGURE 1
2.Attach the wiring to the wire connector. Please make sure the live wire (Black) goes into the "L", the neutral wire
(White) goes into the "N" and the ground wire (Green) goes into the "G".
L N G
3. Replace the plate and reattach.
Page 12
08.19.20