Option 2: Recessing the Appliance Flush into the Wall
builder before you install this appliance in the wall.
Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper etc.
1. Measure the appliance and create a rough in with
electrical.
2. Remove the front glass (refer to Pages 14 for
instructions).
3. Hold the appliance up to ensure it will fit into the
framing.
NOTE: The slim design of our units allow
Page 10
TOP VIEW
FRONT VIEW
08.19.20