Number of cylinders..........................................................................................................................................4

Cylinder arrangement ............................................................................................................................... In line

Cycle.................................................................................................................................................Four stroke

Induction system...................................................................................................................Naturally aspirated

Combustion system .................................................................................................................... Direct injection

Nominal bore ......................................................................................................................105,00 mm (4.13 in)

Stroke ...................................................................................................................................127,0 mm (5.00 in)

Compression ratio ....................................................................................................................................19.3:1

Cubic capacity ...................................................................................................................4,4 litres (269.00 in

Firing order ...........................................................................................................................................1, 3, 4, 2

Valve tip clearances (hot or cold)

Inlet .......................................................................................................................................0,20 mm (0.008 in)

Exhaust.................................................................................................................................0,45 mm (0.018 in)

Lubricating oil pressure (max engine speed and normal engine temperature) .207 kPa (30 lbf/in

Capacity of a typical lubricating oil system:

- includes oil filter .................................................................................................................. 8,5 litres (15 pints)

- sump only ........................................................................................................................ 7.5 litres (13.2 pints)

Typical coolant capacity (engine only) ................................................................................ 16.5 litres (29 pints)

Direction of rotation ..................................................................................................... Clockwise from the front

Battery:

12V system ............................................................................................................... One 12V, 520A to BS3911

24V system ................................................................................................................Two 12V, 440A to BS3911

Weight of the engine (dry) ........................................................................................................462 kg (1019 lb)

The sump capacity will vary according to the installation angle. Do not exceed the "Full" mark on the dipstick,

(1)

see "Caution" on page 43.

Page 106

(1)

N39453