7.4.4 Saving presets
When the session is saved, the state of the minimoog V is saved as is, even if the
programming corresponds to no preset. For example, if you were working on a preset
«BassOne» on which you had changed settings (without saving them as «BassTwo»),
the next time you open the song, the minimoog V will load the preset «BassOne» plus
the changes.
7.4.5 Automation
Automation with Sonar works simply by reception and recording of MIDI messages of the
type Control Change. You can configure the reception of MIDI events by the minimoog V
in the same way as standalone mode. The sequencer takes care of recording the
continuous controls transmitted to the minimoog V, and lets you edit them.
64
minimoog V
ARTURIA –
– USER'S MANUAL