Arturia Minimoog V User Manual page 60

Connection of a MIDI track to the minimoog V
The MIDI events played on a MIDI keyboard are then transmitted by your sequencer to
the minimoog V. It is of course possible to record these MIDI events, and use all of the
MIDI editing options of the sequencer.
7.2.4 Saving presets
When the session is saved, the state of the minimoog V is saved as is, even if the
programming corresponds to no preset. For example, if you were working on a preset
«BassOne" on which you had changed settings (without saving them as «BassTwo»), the
next time you open the song, the minimoog V will load the preset «BassOne» plus the
changes.
The drop down menu offered by the VST sequencer which saves the settings of a plug-in
is of course compatible with the minimoog V. Nonetheless it is strongly recommended
that you use the internal menu of the minimoog V: the presets saved in this manner can
be used in any other mode (standalone or other sequencer), and can be exported as a
separate file.
7.2.5 Automation
Automation works with the minimoog V like any other VST plug-in (see the VST
sequencer documentation for more details on plug-in automation). Preset changes,
however (and thus cable changes) cannot be automated.
60
minimoog V
ARTURIA – – USER'S MANUAL