Arturia Minimoog V User Manual page 55

A 2 position «MIDI Sync» switch synchronizes the repetition time with the tempo of
the host application. This will help to quickly find the appropriate timing for each side.
Try for example the values «Tempo» (synchronized to a crotchet) for the left and
«Tempo 1.5» (synchronized to a dotted crotchet) for the right side.
Now set the number of repetitions for both sides by turning the «Feedback Left &
Right» knobs.
To Finish, as for the chorus effect, place the «Dry /Wet» knob to the center
(Dry :50.00% Wet 50.00%) You will obtain a balance between the gain setting
applied to the signal without effect («Dry») and the gain setting applied to the treated
signal («Wet»).
These different examples, as you will have noticed, presented different levels of difficulty.
We hope that they will have allowed you to see a few of the possibilities offered by the
minimoog V. But don't hesitate to try your own settings, this is the best way to progress
and have more originality.
ARTURIA – minimoog V – USER'S MANUAL
Synchronization of delay to MIDI tempo
The «Feedback Left» setting
55