Advertisement
1
Revision history
Rev.
Date
A
12.05.2015
Tab. 1 :
Revision history
2
Introduction
2.1
About this operating manual
These operating instructions describe the use and operation of the HT40 Hand tool and the
necessary maintenance measures. All persons using the Hand tool must therefore be familiar
with these operating instructions and follow them. It should be stressed that the operating in-
structions for the HT40 Hand tool are essential.
These operating instructions must be available with the Hand tool at all times. The Hand tool
owner/user is obliged to supplement these operating instructions with instructions in line with
existing national regulations for the prevention of accidents and environmental protection.
These operating instructions apply to the following Hand tool from TE Connectivity:
HT40 Basic Hand Tool:
2.2
Intended use
The HT40 Basic Hand tool can process the widest range of crimp contacts using different crimp-
ing dies, up to a cross-section of 120 mm².
HT40 Basic Hand Tool
Description
First version
TE PN 4-1579000-0
Page 3 - 7
Name
Levin Sandhu
Operating instructions
411-18589-1 Rev.A
Advertisement
