Advertisement
6
Customer Service, EMEA Service Hotline
Please contact us for all service enquiries or technical support:
Monday – Thursday
Friday
Tel.
www
_____________________________________________
TE Connectivity Germany GmbH
c/o Schenck Technologie- und Industriepark GmbH
Landwehrstr. 55/Gebäude 83
64293 Darmstadt
Germany
Additional information and contacts can also been found on the Web.
Visit us at:
7
Maintenance and servicing
7.1
Daily maintenance
The following daily maintenance tasks should be performed by the responsible operator:
Use a soft, clean brush or a lint-free cloth to remove dirt, dust, moisture and other residues
from the hand tool. Do not use any hard or abrasive tools or materials that could damage
the hand tool.
Apply sewing-machine oil to all pivot points and bearing surfaces. Do not lubricate exces-
sively.
If the hand tool is not needed, store it in a clean and dry location.
7.2
Periodic inspection
The hand tool should be inspected periodically by suitably qualified staff according to the
level of use, and the inspections should be documented.
Check the hand tool for wear and damage, particularly in the area of the crimp nests.
HT40 Basic Hand Tool
8am to 4pm
8am to 2pm
+49 (0) 6151 607 -1518
FieldServiceEMEA@te.com
http://tooling.te.com/
Page 7 - 7
Operating instructions
411-18589-1 Rev.A
Advertisement
