Table of Contents
Advertisement
5. TROUBLESHOOTING
1. Constant flashing of the red LED or an audible alert. See Figure 14. If the failure cannot be solved
through the action recommended in Figure 15 contact the Tooling Assistance Center.
2. If the tool loses oil, contact the Tooling Assistance Center. Do not open the tool or damage the seal of
the tool
3. The red LED flashes three times and simultaneously three audible alert warning signals occur (see
Figure 15). Serious fault! If this fault occurs repeatedly, contact the Tooling Assistance Center. Do not
open the tool or damage the seal of the tool.
6. TOOL REPAIR
When repair of the tool is necessary, contact the Tooling Assistance Center at 1-800-722-1111 for detailed
information.
7. REVISION SUMMARY
Updated document to corporate requirements
Added new text in Paragraph 3.2.7
Rev B
Figure 15
409-10104
12 of 12
Advertisement
Table of Contents
