CAMPAGNOLO 11 Speed Manual
  1. Manuals
  2. Brands
  3. CAMPAGNOLO Manuals
  4. Bicycle Accessories
  5. 11 Speed
  6. Manual

CAMPAGNOLO 11 Speed Manual

Chain
Hide thumbs Also See for 11 Speed:
1
2
3
4
5
6
7

Advertisement

Table of Contents

11s CHAIN

1 - TECHNICAL SPECIFICATIONS

2 - COMPATIBILITY

WARNING!
The use of sprockets or chainrings which are not marked Campagnolo
opening of the chain and cause accidents, personal injury or death.
WARNING!
Different combinations from those included in the table could cause the malfunction of the drivetrain and result in an accident,
personal injury or death.
ULTRA-TORQUE 11s
ULTRA-TORQUE 11s
CX 11
CX 11
BORA ULTRA 11s
BORA ULTRA 11s
BULLET ULTRA 11s
BULLET ULTRA 11s
11s
11s
11s
11s
can damage the chain. This may result in its unexpected
®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 11 Speed and is the answer not in the manual?

Questions and answers

Related Manuals for CAMPAGNOLO 11 Speed

Summary of Contents for CAMPAGNOLO 11 Speed

  • Page 1 BULLET ULTRA 11s BULLET ULTRA 11s WARNING! The use of sprockets or chainrings which are not marked Campagnolo can damage the chain. This may result in its unexpected ® opening of the chain and cause accidents, personal injury or death.
  • Page 2 3 - 11s CHAIN INSTALLATION WARNING! All connecting and disconnecting of the Campagnolo 11 SPEED chains should be performed using the special Campagnolo UT-CN300 ® ® tool. Use of other tools could damage the chain and/or provoke unexpected chain failure resulting in an accident, personal injury or death.
  • Page 3 CHAIN COMPONENTS ROAD - Tighten the tool until the small pin emerges completely from the hole in the link (Fig. 6). INSERTING THE BUSHING ULTRA-LINK CN-RE500 3.1.1 - • Remove the plastic band and the adhesive “Warning” label. • To install the closing pin ULTRA-LINK CN-RE500, place the chain on the bottom bracket shell.
  • Page 4 • Check that the tapered tip of the pusher (F) (Fig. 12) is in External side line with the centre of the rivet ULTRA-LINK CN-RE500 (E) of the chain (Fig. 12). • While exerting a uniform force, screw in the tool (Fig. 13) so that the rivet ULTRA-LINK CN-RE500 (E) has completely entered the thickness of the chain.
  • Page 5 CHAIN COMPONENTS ROAD LOCKING THE RIVET ULTRA-LINK CN-RE500 3.1.2 - • Prepare the tool UT-CN300 by positioning the tongue in closure mode (Y - Fig. 16). • Position the tool UT-CN300 as indicated in Fig. 17 (from the outside of the chain towards the inside). •...
  • Page 6 • The slight protrusion (X) (towards the external side of the chain) of the small pin (E) from the link (Fig. 22) is entirely normal and does not obstruct normal chain movement. NEVER try to eliminate this protrusion! Lato esterno External side della catena.
  • Page 7 4 - MAINTENANCE WARNING! If it becomes necessary to open and close the chain (which can be done only twice), use only the special Campagnolo Ultra-link CN-RE500 socket with Campagnolo UT-CN300 tool. The use of sockets produced by different manufacturers can damage the chain. A damaged chain can break, even suddenly, and cause accidents, injuries and even death.

This manual is also suitable for:

11s

Table of Contents