Bass Control; Treble Control; Balance Control; Level Control - Art HeadAmp 6 Pro User Manual

Bass Control

This control can be used to boost or cut the low frequencies in each respective channel. The bass response
is flat when the control is set to the 12 o'clock position.

Treble Control

This control can be used to boost or cut the high frequencies in each respective channel. The treble
response is flat when the control is set to the 12 o'clock position.

Balance Control

This control provides one of two functions depending on whether there is a plug inserted into the rear panel
STEREO AUX INPUT for a particular channel.
With no plug inserted into the rear panel jack, the control will vary the Left / Right balance of the main signal
bus.
With a plug inserted into the rear panel jack, the control changes function to vary the balance between the
stereo signals coming from the main signal bus and the stereo signals coming from the rear panel STEREO
AUX INPUT for that respective channel. (By feeding a return signal for only the vocal microphone of a
particular musician they can use the BALANCE control as a 'More Me" control by varying the mix between their
microphone signal alone, and the main signal bus audio. This effect is heard only in that individual headphone
channel.)

Level Control

This control varies the audio output level coming from the front and rear panel 1/4-inch stereo output jacks for
each respective channel. The audio level for each channel output is displayed by the eight-segment LED level
meter located just to the left of the front panel 1/4-inch output jack.

Power Switch

This rocker switch turns the AC power On and Off. A small LED indicator in the rocker button illuminates to
indicate that the power is on.

Rear Panel

FIGURE 2 - Rear Panel Inputs

7