Features - Honeywell SC100 User Manual

Sensitivity
Settings
G

Features

Seismic Vibration Detector SC100 has the following features:













Detection
Material
Radius
Steel 1.5m
noisy

Sensitivity settings (G
18.

The parameters in the table above are for reference only, and they may vary according to
Note
the quality of the material.

The detection range will be reduced if cracks and joints exist in the material.
24-hour detection of all known attack tools on Vault, Doors, Safes, ATMs, and so on.
Flat frequency non resonant response sensor for genuine frequency analysis.
Built-in diagnostic tool used to set detector sensitivity in relation to existing noise level.
DIP switch sensitivity settings adapt to various applications.
Integrated EOL resistors compatible with various control panels.
High detection capability due to new sophisticated signal handling and computer algorithms
incorporated.
Low current consumption.
Solid state change over alarm relay.
Multipurpose accessories provided with multiple applications.
Standard drill sheet protection.
Rate of Rise and temperature alarm.
Miniature metal housing – easy to fit in restricted spaces.
Approved by IMQ type 3 (pending), UL (pending), ULC (pending), CE, and CCC (pending).
Applications
Free Standing Safes, Night
Deposit Safes, ATMs and
Chests with excessive noise
(internal or external)
, G , G , G ) are defined in
high normal low noisy
Honeywell
Noise Level
Heavy noise level
"DIP Switch Settings" on page
- 3 -