1 Introduction
The ZG8150 is a glossmeter for use in a production test system. With a dedicated cable it can be
connected to a USB or RS232 interface on the host (e.g. PC). For that a dedicated cable is used and
the device has to be configured accordingly.
1.1 Scope of this document
This document is an instruction manual for the ZG8150 Inline Glossmeter.
It describes in technical details, the mounting and explains the connection setup, the protocol format,
the command set and their parameters, the answer-strings of the device as well as possible error
reports.
10. August 2020
© Copyright 2020, PROCEQ SA
1