Table of Contents
Advertisement
6.9 53 – LaserEnable
This command enables or disables the laser of the glossmeter.
Command:
Command string:
Return string:
Parameter:
Data
Example
Send
Receive
6.10 56 – Error
This command returns the error of any command.
Command:
Command string:
Return string:
Parameter:
Command
Error
Example
Name
-1
UNDEFINED_ERROR
0
NO_ERROR
1
OPCODE_NOT_FOUND
9
NO_STANDARD_VALUE
10
DEVICE_NOT_ON_WORKING_STANDARD Device is not placed on the
12
VALUE_OUT_OF_RANGE
13
PARSE_ERROR
14
PARAMETER_ERROR
30
NO_ACCESS_RIGHTS
31
ACCESS_DENIED
10. August 2020
53
53|TID|Data:
53|TID:
0 = disable laser, 1 = enable laser
53|xy|1:
53|xy:
56
-
56|TID|Command|Error:
Command caused the error
Error code
© Copyright 2020, PROCEQ SA
Command: 53
TID: xy
Data: 1 (enable laser)
Command: 53
TID: xy
Description
No command with this code
exists.
No valid standard value is used.
working standard.
Value is out of range.
The format of the send string is
not correct or wrong send
parameters are used.
The index of a setting is wrong.
The user has no accees rights.
No access because it is not
possible to access the resource.
16
Advertisement
Table of Contents
