Table of Contents
Advertisement
4 Connection setup
The glossmeter has a USB connection and can be connected to a USB or RS232. Interface on
the host (e.g. PC). For that a dedicated cable is used and the device must be configured
accordingly.
4.1 USB connection setup
To connect the device to a USB port a USB type C to type A cable is used. The device needs
to be setup for USB connection.
Connector Type
1
A (male)
2
C (male) Plugged on device side
10. August 2020
Description
Plugged on PC side
© Copyright 2020, PROCEQ SA
Setting
Value
Baudrate
115200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
6
Advertisement
Table of Contents
