Table of Contents
Advertisement
4.2 RS232 connection setup
To connect the device to a RS232 port the RS232 connection kit is used.
This consists of
1. a USB Y-cable
2. a USB-to-RS232 converter
3. a gender changer adapter
Connector
1
2
3
In order to communicate to a RS232 port the device needs to be setup for RS232 communication
(see section 6).
The serial port of the computer has to be set to the following communication settings:
Setting
Baudrate
Data Bits
Stop Bits
Parity
Flow Control
10. August 2020
Type
A (female)
C (male)
A (male)
Value
115200
8
1
None
None
© Copyright 2020, PROCEQ SA
Description
Plugged to the RS232 adapter
Plugged on device side
Plugged to power 5V (e.g. PC side)
7
Advertisement
Table of Contents
