Related Manuals for Rockler 36833
Summary of Contents for Rockler 36833
- Page 1 Thin Rip Table Saw Jig Instructions Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your product.
- Page 2 To find the most recent version, find suitability for intended application. the product page on Rockler.com and click on the > Always wear safety glasses in compliance with ANSI link to the Instructions.
- Page 3 PRODUCT SPECIFIC SAFETY WARNINGS > The Thin Rip Table Saw Jig is designed to be used Jig to reduce the chance of the workpiece being only on table saws with a 3/8" x 3/4" miter gauge slot. trapped between the insert and the blade, which could cause dangerous kickback.
- Page 4 5. Make the rip cut. Fig. 4. 6. Repeat steps 4 and 5 as needed to cut matching thin strips. Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com Fig. 3 - Adjusting fence only Fig.
Need help?
Do you have a question about the 36833 and is the answer not in the manual?
Questions and answers