AUDAC WaveDynamics ANI Series Quick Start Manual

Dante audio network interface

Hide thumbs Also See for WaveDynamics ANI Series:

ANIxx

Quick start guide

www.audac.eu

Table of Contents

Need help?

Do you have a question about the WaveDynamics ANI Series and is the answer not in the manual?

Page 1 ANIxx Quick start guide www.audac.eu...
Page 2 Introduction WaveDynamics™ Dante audio network interface This manual guides you through the setup process of a basic project using a WaveDynamics™ supporting amplifier with a Dante audio network interface installed. This interface allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more.
Page 3 For configuration of the system, the Audinate Dante Controller software shall be used. The use for this tool is extensively described in the Dante controller user guide which can be downloaded from both audac (www.audac.eu) or Audinate (www.audinate. com) websites. In this document we quickly describe the most basic functions to get you started.
Page 4 Screenshot of Dante controller software For giving custom names to the devices or the channels, double click the device name whereafter the device view window will pop up. The device name can be assigned in the ‘Device config’ tab, while the transmitting and receiving channel labels can be assigned under the ‘Receive’...