Page 2
This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ www.audac.eu. REV-1.0...
Introduction Remote volume controller The WP200 is a remote volume controller which can be stepless regulated over an applied voltage level, allowing volume regulation for a variety of devices. It is compatible with various products working with an analogue input voltage. The front panel is finished with high-grade materials such as hardened glass making them blend into any environment.
Please dispose this product at your local collection point or recycling centre for electrical and electronic waste. This will make sure that it will be recycled in an environmentally friendly manner, and will help to protect the environment in which we all live. WP200 - User manual...
On the front of the wall panel you will find a knob which controls an anti-log potentiometer for the volume control. Overview rear panel The rear of the WP200 contains an 8-pin Terminal Block connector, which is used to connect the wall panel to the twisted pair cabling. Terminal block...
For connection to Wall Panels The 8-pin Euro-Terminal Block on the rear side of the WP200 should be connected to twisted pair cabling. The maximum cable distance between the input unit and the speaker system can reach up to 100 meters.
80 x 80 x 53 mm (W x H x D) Built-In depth 35 mm Colours Black (RAL9005) White (RAL9003) Front finish ABS with glass Accessoiries Surface mount wall box WB200 Solid wall WB45SI/FS Hollow wall WB45S/FG Compatible devices SCP series AMP22 Discover more on audac.eu...
Need help?
Do you have a question about the WP200 and is the answer not in the manual?
Questions and answers