Preparation Before Use - Xiaomi Dreame Bot L10 Pro User Manual

Clearing Home Environment
EN
To improve the working efficiency of your robot, put away any loose cords
(including the power cord of the charging dock), rags, slippers, toys, etc.
Open the door of the room to be cleaned, and put the furniture in its proper
place to make more space.
8
Before cleaning, place a physical barrier at the edge of the stairs and sofa to
ensure safe and smooth operation of the robot.
To prevent the robot from not recognizing the area to be cleaned, do not stand
in the front of the robot, threshold, hall way, or narrow places.

Preparation Before Use

1. Remove the protective matter
2. Install the side brush
Click
Note: Install the side brush until it clicks into place.
3. Place the charging dock on the level ground against the
wall and connect it to a power outlet
＞ 0.5 m
＞ 0.5 m
＞ 1.5 m
Note:
• Keep the immediate area 1.5m in front of the charger and 0.5m to both sides
of the charging dock clear of objects.
• To ensure you can connect to the robot with your phone well, make sure the
robot and charging dock are within the range of Wi-Fi.
• Do not place the charging dock in an area with direct sunlight or where other
objects might block the signal, as this may hinder the robot from returning to
the charging dock.
4. Place the robot onto the charging dock to recharge. The
robot will turn on automatically and begin recharging
Battery Level Indicator
• White: Battery level is more than 15%
• Orange: Battery level is less than 15%
Note:
• Fully charge is recommended before first-time use.
• Do not install the mopping module while charging. Be extra careful with the
wet mop as it can damage the floor.
EN
9