Installation - ADTRAN DDS-DP Installation And Maintenance Manual

Zero Code
Rate Selections
Only one rate should be selected. Service rates
of 64 kbps, 19.2 kbps, and Switched-56 are not
supported by the SLC Series 5 BCU. These
operating modes must be provisioned by
enabling switches on SW2. A manual rate
setting overrides BCU rate settings. The Series
5 Total Reach DDS-DP does not support 38.4
kbps.
Signaling
NOTE
A/B signaling option is only applicable when
SW56 is selected; otherwise it is a "don't care."
61433105L2-5D
NOTE
Section 61433105L2, Issue 4
Quality Monitor

2. INSTALLATION

C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
Warranty and Customer
Service.
Tip/Ring Pair
Span Power
Synchronization and LED Indication
Table 2
3. TESTING
3