Table of Contents
Advertisement
To Reformat in Mac OS 10.
Caution: This will destroy any data on the hard drive. Backup any
data before you continue with the reformatting of the EZ Bus DT
hard drive.
1
Make sure the EZ Bus DT is plugged into the USB port. The drive should
appear as a drive on your desktop.
2. Go to the "Utilities" folder and select Disk Utilities .
3. Select the drive from the list:
a. A description of the drive appears in the window.
b. Connection bus should be USB 2.0.
4. Select the Erase tab on the top of the window.
5. From the volume format drop down list, select the Mac OS Extended .
6. Enter EZ Bus DT into the Name box.
7. Select the check box next to Install Mac OS 9 Drivers . This will allow
you to see your EZ Bus DT hard drive if you boot to Mac OS 9.x
8. Click the Erase button: An alert will appear to confi rm the erase
process.
9. Click the Erase button to start the formatting process.
10. To confi rm that the EZ Bus DT hard drive is properly formatted, Select
the EZ Bus DT drive, then Select: File, Get Info . The format should
read Mac OS Extended.
23
The Leader in Personal Storage
Advertisement
Table of Contents
