Strong A330U Assembly Instructions page 2

EN
1.0 Connect the stand feet to the TV
Place the TV with the display side downwards on a flat surface (table).
Use a cloth or big towel to protect the display.
Insert the 2x stand feet into the TV bottom respectively, please make
sure that the screw holes are corresponding to the TV bottom.
Use a suitable screwdriver to insert and tighten the 4 pcs (M4X14)
screws. Do not use brute force.
2.0 Put the TV carefully to its feet
3.0 Alternative: wall mounting
This TV is designed to be wall‑mounted with a standard 200 x
200 mm mounting kit designed for flat‑panel TVs.
IMPORTANT:
To ensure a safe installation, comply with the following safety
instructions:
• This operation requires two people!
• Disconnect from power supply before mounting.
• Check that the wall can support the weight of the TV set
and wall mount assembly.
• Follow the mounting instructions provided with the wall
mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material of
the wall.
• Make sure that the TV set cables are placed in such a way
that there is no danger of tripping over them.
• Mounting the TV set on the wall should be performed
only by professionals.
3.1 Use the expansion bolts to fix the wall mount brackets into the
wall.
3.2 Place the TV onto a solid surface. Please place some soft material
over the front of the screen to protect it from any damage.
3.3 Use the 4x screws provided to fix the TV onto a wall mounting
bracket via the 4x VESA standard holes on the back of the TV.
Fig. 1
3.4 Put the TV with wall mount screws onto the wall mount brackets.
VESA wall mount types are especially made for this and will fit well
(not included).
Fig. 2
Fig. 3
Fig. 4
Fig. 5